EN
Tilt & Li
,
25 RTS
24
Copyright
©
2018 SOMFY ACTIVITES SA, Société Anonyme All rights reserved.
3.3. UP, DOWN, MY: IN TILTING MODE
1) To move the motorised product from a limit to
the other limit, briefly press (less than 0,5s) the
Up
or
Down
button.
2) To stop the motorised product, press the
my
button.
3) If a my position is recorded,To move the
motorised product to this my position, press
briefly the
my
button. The motorised product
first goes to the down end limit, then to the my
position.
4) To tilt the slats, press and hold the
Up
or
Down
button or use the scroll of the remote control, until the slats reach
the desired position.
3.4. ADDITIONAL SETTINGS
3.4.1. Record or Modify the favourite position (my)
1) Place the motorised product in the desired
favourite position (my).
2) Press the
my
button until the motorised
product moves up and down: the desired
favourite position (my) has been programmed.
!
In tilting mode (the default mode), if you want to
save a favorite slat position, turn the motorised
product necessarily in the down end limit, then
set the desired position by pressing the
Up
button.
3.4.2. Deleting the favourite position (my)
To delete the my position, press the
my
button to
move to this position and press the
my
button until
the motorised product moves up and down.
1
2
4
3
1
2