EN
Tilt & Li
,
25 RTS
21
Copyright
©
2018 SOMFY ACTIVITES SA, Société Anonyme All rights reserved.
Attention
To press on the motor
PROG
button, it’s best to use the motor
antenna. The use of other tools could damage the
PROG
button.
2.4.2. Re-setting the end limits
2.4.2.1. Readjusting the upper end limit
1) Press the
Up
button to bring the motorised
product to the end limit to be readjusted.
2) Press the
Up
and
Down
buttons at the same
time until the motorised product moves up and
down.
3) Press the
Up
or
Down
button to move the
motorised product to the new desired position.
4) To confirm the new end limit, press the
my
button until the motorised product moves up
and down.
2.4.2.2. Readjusting the lower end limit
1) Press the
Down
button to bring the motorised
product to the end limit to be readjusted.
2) Press the
Up
and
Down
buttons at the same
time until the motorised product moves up and
down.
3) Press the
Up
or
Down
button to move the
motorised product to the new desired position.
4) To confirm the new end limit, press the
my
button until the motorised product moves up
and down.
2.4.3. Adding or deleting a RTS control point
Find an RTS control point (A) programmed in the
motor.
Press and hold the RTS programmed control
point
(A)
PROG
button or the motor
PROG
button
until the motorised product moves up and down:
the motor is in programming mode.
Quickly press the RTS control point(B)
PROG
button to add or delete: the
motorised product moves up and down and the RTS control point is programmed
or deleted from the motor.
1
3
4
2
1
3
4
2
A
A
B
B
A
PROG.
A
A
B
PROG.
B
