Copyright © 2008 Somfy SAS. All rights reserved.
10.6 Cancelling customised settings
-
To
fi
nd the pre-set program for the Chronis Smart RTS
after having customised the settings and to return to
the default automatic opening and closing times:
ON
-
the standard display, press and hold the up
button (A) and down button (C) at the same time,
until “rES” is displayed».
All customised settings for the opening and clos-
►
ing times have been cleared.
The Chronis Smart RTS is now operating using
►
the pre-set program (see paragraph 10.1.2).
11. Problems with the Chronis Smart
RTS?
Problem
Possible causes
Solutions
The product does not move
after pressing a button on the
Chronis Smart RTS.
The Chronis Smart
RTS battery is weak.
Replace the battery with a battery having
identical speci
fi
cations - see the paragraph:
"Replacing the battery".
The Chronis Smart
is not linked to this
product.
Link the Chronis Smart to the product - see
the paragraph: "Adding the Chronis Smart
RTS".
There is nothing displayed
on the Chronis Smart RTS
screen.
The Chronis Smart
RTS battery is weak.
Replace the battery with a battery having
identical speci
fi
cations - see the paragraph:
"Replacing the battery".
The product does not make
a brief movement or does not
emit any beeps.
Contact the Somfy assistance service.
The new Chronis Smart RTS
cannot be used after following
the procedure step by step.
The Chronis Smart
RTS is too far away
from the product(s) to
be controlled
Move the Chronis Smart RTS near to the
product and press a button. If the Chronis
Smart RTS still does not operate, contact
Somfy's support service.
Linking the
Chronis Smart RTS
failed
Contact the Somfy assistance service.
The Chronis Smart RTS
controls another product.
A problem occurred
whilst linking the
Chronis Smart RTS.
Contact the Somfy assistance service.
The product does not move at
the set time.
The program timer
mode has been
deactivated.
Activate the program timer mode - see the
section entitled “Operation”.
The product is raised when the
Down button is pressed.
The product is lowered when
the Up button is pressed.
The Chronis Smart
RTS is mounted
upside down.
Turn the Chronis Smart RTS so that the
screen is on the right-hand side of the Up/
Stop/Down buttons.
The original control
point has a single
button.
Contact the Somfy assistance service.
For any problems or unresolved questions, please
contact the Somfy assistance service on the number
given on the back cover of this guide.
14 32
:
27
:
( 2
1
3
Chronis Smart RTS
27
