Chronis Smart RTS
16
Copyright © 2008 Somfy SAS. All rights reserved.
9.2.1 Deactivating/Activating the Program Timer
Mode
By default, the Chronis Smart RTS operates in Program
Timer mode.
Deactivating the Program Timer
O
-
n the standard display, press the “MODE”
button until “OFF” is displayed instead of the
time of the next programmed movement for the
product (L).
Activating the program timer
O
-
n the standard display showing “OFF”, press
the “Mode”
button until the display of the
next programmed movement for the product (L) is
shown.
Information on the direction of the next movement
►
of the product (N) and the closing mode (M) are
displayed.
9.2.2 Up and Down Buttons (for shutters)
-
Press the Up button (A): all linked products are raised
and automatically stop in the raised/open position.
Press the down button (C): all linked products are
-
lowered and automatically stop in the lowered/closed
position.
To move from the up to the down direction (and vice
-
versa), it is not necessary to press the Stop button (B).
Operating mode for venetian blinds
The default operation for the Chronis Smart RTS is
standard and is intended for roller shutters in particular.
To enable the adjustable slats on venetian blinds (inte-
rior or exterior) to be controlled, a parameter must be
changed. For further information on this function, visit
Somfy's website (the address may be found on the back
of this guide).
9.2.3 Stop Button
The Stop button (B) has two functions:
A Stop function: brie
fl
y pressing the Stop button
•
stops movement of the linked products.
A favourite position function: brie
fl
y pressing the
•
Stop button sends the linked products to the favourite
position, if a favourite position has been stored and if
the product is stationary.
For further information on the favourite position function,
visit Somfy's website at the following address:
http://www.somfy.com/mysomfy/
14 32
:
27
:
( 2
1
3
32
S
14 32
:
ff
0
3
32
S
14 32
:
ff
0
3
14 32
:
27
:
( 2
1
3
N
M
L
A
C
5
5
B
5
5
L
