Chronis Smart RTS
23
Copyright © 2008 Somfy SAS. All rights reserved.
“Cosmic” mode.
A positive value means that automatic closing
►
will take place later than the pre-set time in the
“Cosmic” mode.
For example, on a day when the “Cosmic” mode is
►
set for automatic closing at 19:00: if the time differ-
ence is set to “- 0:45”, the product will be closed at
18:15, and if the time difference is set to “1:20”, the
product will be closed at 20:20.
Automatic closing is set in the “Cosmic” mode with an
►
identical time difference for every day of the week.
Note: Once time has been changed, the Chronis Smart
RTS remembers the change, even if the sub menu button
is not used to con
fi
rm, so if an incorrect time has been
entered, the process must be started again.
-
Press the Sub-menu button
to return to the “dn”
display and con
fi
rm the settings.
The programmed time for the current day is
►
displayed.
“C” is displayed: closing is programmed in
►
“Cosmic” mode.
Press the Menu button
-
to return to the standard
display.
10.4.3 The same time every day of the week
This program enables the product to be closed automati-
cally at the same set time during the week.
-
On the standard display, press the menu
button
until “CLOC” is displayed.
Press the Menu button
-
several times to select the
“Closing time” parameter:
“dn” is displayed.
►
Caution: The closing time may be set following setting
of the opening time. FROM the “UP” display, press the
Menu button
to display “dn”.
Press the Sub-menu button
-
:
“tImE”
fl
ashes, “program timer” mode is activated.
►
If “COS”
fl
ashes, “Cosmic” mode is activated:
-
Press the
-
button to switch to “program timer”
mode.
Press the Sub-menu
-
button again:
All days of the week “1234567
►
”
fl
ash.
The programmed time
fl
ashes.
►
Press the
-
button to set the time:
The closing time is changed for all days of the
►
week.
Note: Once time has been changed, the Chronis Smart
RTS remembers the change, even if the sub menu button
is not used to con
fi
rm, so if an incorrect time has been
entered, the process must be started again.
Press the Sub-menu
-
button several times to return
to the “dn” display and con
fi
rm the settings.
The programmed time is displayed.
►
“H” is displayed: closing is programmed in
►
“program timer” mode.
Press the Menu button
-
to return to the standard
display.
14 32
:
27
:
( 21
S
3
dn
27
:
( 21
“Cosmic” mode
Programmed
time
(l 0(
32
:
14
dn
27
:
( 21
14 32
:
27
:
t 21
S
3
dn
27
:
t 21
“Timer” mode
Programmed
time
ti
dn
“Timer” mode
20 00
:
t ti
1
2
3
4
5
6
7
Week
Programmed
time
