SOMFY Chronis Smart RTS Operating And Installation Manual Download Page 14

Chronis Smart RTS

18

Copyright © 2008 Somfy SAS. All rights reserved.

10. Customising the programs

10.1 Programs available

10.1.1 Introduction to the programs

To use the Chronis Smart RTS in Program Timer mode, there are different types of programs 

available which can be con

 gured:

Opening the products:

at the same set time during the week - see paragraph 10.3.1,

 

-

at a different set time depending on the day of the week - see paragraph 10.3.2,

 

-

deactivated during the week - see paragraph 10.3.3,

 

-

deactivated for one or more days during the week - see paragraph 10.3.4,

 

-

based on the same set time every day or different depending on the day of the week with 

 

-

a maximum random difference of + or -15 minutes controlled by the vacation mode - see 

paragraph 10.5.1,

Closing the products:

based on the “Cosmic” mode during the week - see “What is the Cosmic mode?” for further 

 

-

information - with the possibility of delaying or bringing forward the pre-set time by + or - 1:59 

- see paragraphs 10.4.1 and 10.4.2

at the same set time during the week - see paragraph 10.4.3,

 

-

at a different set time depending on the day of the week - see paragraph 10.4.4,

 

-

deactivated during the week - see paragraph 10.4.5,

 

-

deactivated for one or more days during the week - see paragraph 10.4.6,

 

-

based on the same set time every day or different depending on the day of the week, with 

 

-

a maximum random difference of + or - 15 minutes controlled by the vacation mode - see 

paragraph 10.5.1.

What is the “Cosmic” mode:

 

-

The “Cosmic” mode is programmed to coincide with 

nightfall,  between  16:30  and  21:30  depending  on 

the date (see diagram opposite).

The pre-set time in the “Cosmic” mode varies daily 

 

-

in order to adapt to the length of the day in this part 

of the world (Europe).

The “Cosmic” mode only applies to a full week.

 

-

A  time  difference  of  between  +  or  -  1:59  can  be 

 

-

con

 gured in relation to the pre-set time.

10.1.2 Pre-programming

During  commissioning,  the  Chronis  Smart  RTS  is  in 

Program Timer mode and is pre-programmed to control:

Opening the product in the morning at a set time which 

 

-

may be different depending on the day of the week: 

from Monday to Friday at 07:30,

 

-

on weekends at 08:00.

 

-

Closing the products in the evening:

 

-

based on the “Cosmic” mode,

 

-

difference of 

 

-

30 minutes.

10.2 How to browse within programs?

On  the  standard  display,  press  the  menu  button

 

-

 

 

until “CLOC” is displayed:

The  standard  display  will  automatically  reappear 

 

after approximately 20 seconds if the buttons have 

not been pressed.

14 32

:

27

:

( 21

S

3

(l 0(

32

:

14

Summary of Contents for Chronis Smart RTS

























Reviews: