SOMFY animeo Operating Manual Download | Manualshive

Page: 3 / 55

background image

animeo KNX 4 AC Motor Controller

30.01.2019

WM/DRM 220-230 V AC



2011-2019, SOMFY Activites SA



50 avenue du Nouveau Monde



74300 Cluses



France

3/55

Before starting up it is necessary to follow the safety instructions in these instructions.
SOMFY cannot be held liable for defects and damages when these have been caused as a result
of not following instructions (wrong installation, incorrect service etc.). Establishing, testing and
starting up of the equipment is permitted only by a qualified person (in accordance with VDE

0100). Switch on all connections without voltage. Take precautions against unintentional turning on.

The installation of the Somfy products may occur only at easily accessible places. If maintenance and repair
become substantially hindered by accessibility (e.g. stuck or extensively stuck flooring, installation behind
lamps or behind façades), any originating supplementary costs therein cannot be charged to the seller.
Subject to technical changes.
The animeo KNX 4 AC Motor Controller WM/DRM 220 - 230 V AC is suited for selecting up to four individu-
ally parameterable motors for Venetian blinds, roller shutters, awnings and windows. The local push button
inputs can be used as conventional push buttons or as universal KNX binary inputs.

Functions and advantages

•

Time savings through easy installation, for example using spring connectors, strain relief cable binders,

sufficient enough clamping space.

•

A group input can be used to control all four motors independently of ETS programming.

•

Every motor is safe with an individual fuse (3.15 A).

•

Testing the moving direction of the motors is possible without ETS.

•

The device can be used in delivery state without programming with the ETS software.

•

Four local push button inputs can be used as maximum to connect eight universal KNX binary inputs, for

example window contacts, temperature switches or presence detectors. By using conventional push but-
tons, lighting can also be controlled and dimmed.

•

User-friendly and intuitive parameter settings in the ETS software.

•

Intelligent change-over between manual operation and automatic operation to guarantee excellent user

friendliness and energy savings.

•

Position messaging of the motors during the movement and when reaching the upper or lower end posi-

tion.

•

Two different safety positions, freely determinable for every individual motor output.

•

Safety position with mains voltage return freely determinable and messaging over building.

•

Automatic cascading of the outputs with mains voltage return and bus-safety functions to minimise power

peaks.

•

Plug and Play! Any time extendable with animeo RTS Radio Module (ref. 1860105) or animeo EnOcean

Receiver (ref. 1860220). Without additional wiring the four motors can be controlled individually per radio
using Somfy RTS technology.

•

Alternatively the animeo KNX RTS Receiver (ref. 1860191) or animeo KNX EnOcean Receiver (ref.

1860229) can be used. Here, without additional wiring, up to 5 universal KNX radio binary inputs can be
gained (e.g. light ON/OFF with DIM).

A complete commissioning is possible if the KNX Motor Controller is connected to and powered by the
KNX bus.

«
1
2
3
4
5
...
»

Summary of Contents for animeo
























































Reviews:

No comments

Related manuals for animeo

BTL7-S5 B-M Series

Brand: Balluff Pages: 14

BML-S1G0 7 M5E 0 Series

Brand: Balluff Pages: 194

Brand: Omega Engineering Pages: 2

Brand: Oki Pages: 52

Brand: Panasonic Pages: 4

Brand: Daikin Pages: 52

V2 SUPERCHARGER

Brand: Tesla Pages: 9

Brand: Oki Pages: 2

Home Power Hockey Table

Brand: Great American Recreation Pages: 10

Brand: Fisher-Price Pages: 8

Brand: Whispbar Pages: 15

Brand: Kodak Pages: 2

Brand: Young Living Pages: 4

Brand: eufy Security Pages: 12

Drive Pro EZ Build 41130

Brand: Meyer Pages: 11

Brand: White Outdoor Pages: 4

Brand: Onset Pages: 4

Brand: Nauticam Pages: 23

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands