User guide
We thank you for your recent purchase of a Somfy
connected alarm. This guide as well as the mobile app
“Somfy Protect” provides you with all the information you
need to install and use it. Before you start the installation,
please read the attached safety instructions carefully.
If you need any additional information concerning this
product, please refer to our FAQ or contact one of our
advisers.
More information on www.somfyprotect.com/support
EN
Download the “Somfy Protect” app,
create your account and follow the
step-by-step installation instructions.
More information on compatible versions
at www.somfyprotect.com/apps.
Install Home Alarm Advanced
To meet your needs and all home configurations, some
components of your alarm can be either placed on a
piece of furniture or glued or fixed to the wall.
Select and follow the instructions!
Link
Advanced
Placed on
a piece of
furniture
Glued with
adhesive
tape
(1)
Fixed to
the wall
(2)
Indoor
keypad
Indoor
siren
Outdoor
siren
Motion
sensor
IntelliTAG®
(1)
3M
TM
stickers provided.
(2)
Screws and wall plugs provided for the installation of the outdoor siren.
(3)
Sources of radio interference: electrical switchboard, bundle of wires,
metallic ground, TV, HiFi, etc.
Fix the components to the wall
In the case of a wall installation, we recommend that you
follow the instructions below.
1.
Do not fix any component until you are sure
that your Link Advanced is connected to Wi-Fi
and communicates effectively via radio with all
accessories.
2.
For products were screws are not provided,
we recommend the use of Ø 3.5 mm countersunk or flat
head screws. Make sure that you always use screws and
plugs suitable for the materials in your wall to avoid any
risk of falling.
!
16 cm
1
2
Fixing the Link Advanced
Fix between 60 cm
and 2 m from the
ground and more
than 1 m away from
all sources of radio
interference.
(3)
TOP
2
1
2
Fixing the outdoor siren
Fixing the indoor siren
Fix in areas that
are unobstructed
and out of reach
(minimum 2.50 m
from the ground
recommended).
Fix close to the
entrance door and
protected leaves,
at least 2 m from
the floor.
10 sec.
1
2
Fixing the indoor keypad
Glue or screw into a
clean, level surface
at a maximum
height of 2 m.
If you use the
adhesive tapes,
your wall must be
painted.
OR
•
•
•
•
•
•
•
•
•
•
•
4
5
