SOLZAIMA K100, Instruction Manual

Page: 146 / 184

141
19.1. Instructions to assemble the remote control
a) Turn off the unit at the master power switch and remove the right cover of the unit
(see section 10 of this manual). Remove the unit's terminals phase (F) and neutral
(N).
a)
b) Crimp the terminals to the cable that supplies the transmitter with 220V power.
b) c)
c) Connect the wires to the ON/OFF contact connector (Figure 147-e); direct the wires
through the groove on the side to the interior of the unit (Figure 147-f);
e) f)