SOLZAIMA K100, Instruction Manual

Page: 128 / 184

123
e) Tighten the Figure 109 assembly on the top face of the combustion chamber using 4
screws A (DIN 7981 5,5x13) in the holes prepared for this purpose (2).
Figure 112 – Fixing the ventilator to the equipment
f) Remove the rear lid from the unit's chassis marked in Figure 110, by cutting the
identified areas using a pair of pliers.
Figure 113 – Removing the rear lid of the equipment
g) Fit the ductable air guide kit into the rear panel of the unit, making sure you insert it
into the internal part of the ventilator's air outlet duct (4).
a) b)
Figure 114 – Fitting the air guide to the free-standing fire unit
2
4