25
9.1.4.
Timer
The unit is equipped with a timer that allows the unit to be turned on or off at a
specified time.
•
Activation
To
activate the timer
press “set”. The “Habilitação” (Activation) menu appears. The
timer may only be activated after setting the configurations, as shown in the following
paragraph.
The programs can be defined in two different ways, either by the “profile load” menu
or by the daily programmer P1 to P6
(only one option can be active, they do not
work simultaneously).
Press the “+” key to scroll to the “Carga Perfil” (Profile Load) menu.
There are 10 weekly programmes available on the Timer (see item 24 in the annexes).
The selected programme runs from Monday to Friday and from Saturday to Sunday.
Press “set”; the display starts to flash. Press the “+” or “-” key to select the desired
programme and then press “ok” to confirm. Press the “+” key to go to menu
“Reiniciado” (Reset).
ON
OFF
+
OK
MENU
MODE
ESC
-
MAN
AUT
esc
Off
Set
Habilitação
>
Summary of Contents for Hidro 12
