SOLZAIMA Hidro 12, Instruction Manual

Page: 91 / 147

85
4 – Connect the wires on the ON/OFF connector contact ( Figure 45 -f); direct the wires
through the cable gland to the interior of the unit ( Figure 45 -g);
f) g)
5 – Assemble the interface at the appropriate location on the unit and position the
remote control (On/Off contact) switch to “remote” ( Figure 45 -h);
h) i)
6 – Connect the interface cable to the electronic plate on the communication card
(Servizi 5J).
j)
Figure 45 - Installation of the chrono-thermostat