SOLZAIMA Hidro 12, Instruction Manual

Page: 8 / 147

2
2. Safety precautions
Solzaima is not liable for any damages to the unit if the specified precautions, warnings
and operating procedures are not followed.
Units manufactured by Solzaima are easy to operate and special attention was given
to their components in order to protect users and installers against accidental
damages.
The units must only be installed by an authorised engineer, who should supply the
client with a relevant statement of conformity and who shall be liable for the final
installation and consequent product good operating conditions.
This unit must be used according to its intended use as specified by the manufacturer.
The manufacturer is excluded from all liability, by contract or by tort, caused by injury
to people, animals or property arising from misuse or faulty installation or servicing.
After removing the packaging, verify the contents to check their integrity and
completeness. If the content of the package fails to correspond to that indicated in
point 1, contact the salesperson from whom you purchased the unit.
All the unit's components guarantee its operation and energy efficiency and should
only be replaced with original parts provided by an authorised technical assistance
centre.
The unit must be serviced at least once a year by the installation engineer.
This manual is provided with the product. Please keep it close to the unit.
2.1. For your safety, we recommend that:
Make sure you fully read and understand this instruction manual before using the free-
standing pellet fire as a biomass heating unit;
• Make sure that the hydraulic circuit was correctly assembled and connected to the
water supply before turning on the free-standing pellet fire;
• The free-standing pellet fire is not intended for use by children or persons with
reduced physical, sensory or mental capabilities, or lack of experience or knowledge,
unless they are under supervision or have been instructed concerning the use of the
unit;
• Do not touch the free-standing fire when barefoot or if any part of your body is wet
or humid;
• Do not tamper with safety or adjustment features without the manufacturer's
authorization;
• Do not cover or reduce the size of the vents at the installation area;