Solwise SAR715PV ADSL Ethernet Router User’s Guide
Chapter
4
. Quick Router configuration using your browser
27
•
Act as Local DHCP Server
(Yes/No)
•
MAC Address;
this is the actual MAC address for the
Ethernet block in this router.
The LAN Status section also provides a
DHCP Server Settings
hyperlink that allows you to configure your DHCP server status.
Hardware Status
This section displays the following status information about your
ADSL router:
•
Up-Time;
the length of time (in hours:minutes:seconds) that
your current session has been connected for
•
Version;
information about the software release which has
been used to build the image running on your ADSL router.
•
Vendor;
The name of the Vendor supplying the ADSL
router. The default setting for this is
GlobespanVirata.
Defined Interfaces
This section lists LAN interfaces that have been defined
Each interface listed has a
Show Statistics
hyperlink associated with
it. Click on this for detailed information about some/all of the
following (depending on the interface type and configuration):
•
the interface
•
connection details
•
port configuration
•
service parameters
4.2 Setting up a basic NAT router configuration
Please note the following:
The default IP address for the 8.2 firmware is 192.168.0.1
The default configuration username and password are admin.
4.2.1 Clearing to factory defaults
Make sure your PC is on an IP address in the same subnet as the
715PV (e.g. 192.168.0.2). Next, enter the address of the router in
your browser address line (i.e. 192.168.0.1)…
The main status page for the router should display.