Chapter
4
. Quick Router configuration using your browser
Solwise SAR715PV ADSL Ethernet Router User’s Guide
22
4 Quick Router configuration using your browser
The easiest way to configure your router is via your web browser
accessing the html pages direct in the router.
To configure using your browser you must first of all must have
successfully installed TCP/IP protocol on your computer as detailed
above.
After checking your connections and TCP settings (see above) you
are ready to run your browser in order to configure the router.
Please note the following:
The default IP address for the 8.2 firmware is 192.168.0.1
The default configuration username and password are admin.
Any browser can be used on any operating system: The
configuration screens are the same.
Note: If you are using Explorer on a PC then first
check that your browser is set to use LAN for internet
access. To do this in Explorer go to Tools/Internet
Options/Connections. Then check that the setting
‘Never dial a connection’ is selected. Then on the LAN
Settings screen nothing should be ticked.
Now start your browser and enter the address of the router on the
Address/URL line of your browser (192.168.0.1). The browser
should then load the start-up page from the router:
If it asks for a Username/Password to enter configuration then use
‘admin’ and ‘admin’….
