15K Pack HV Installation Manual
© 2020 Soluna Australia Pty Ltd
Page 25 of 25
Published date: November 2020
6.
Troubleshooting
Check the indicators on the front of the BS to determine its status.
A warning state is triggered when a condition such as voltage, current or temperature has
exceeded design limits.
The BMS of the BS periodically reports its operating state to the inverter. When BS operating
conditions are outside prescribed limits, it enters a warning state. When a warning is reported,
the inverter immediately ceases operation. The monitoring software on the inverter can be
used to identify the cause of the warning. Possible warning messages are as follows.
1)
Battery Over Voltage
2)
Battery Under Voltage
3)
Battery Over Temperature
4)
Battery Under Temperature
5)
Battery Discharge Over Current
6)
Battery Charge Over Current
Any warning messages are cleared when the BS returns to normal operation.
7.
Contact us
If you have any questions, please contact us.
Soluna Australia
1/677 Murray Street, Perth WA 6005
Phone 1300 126 888
Email
Web
www.soluna.com.au