© 2006 - 2007 Datalogic Scanning, Inc.
R44-2669 (Rev. X1)
3/07
Using the Charger
The 4-Station Charger can be used to charge from one to four Battery Packs simultaneously.
1. Plug the AC Adapter into the bottom of the charger, then plug the cable from the AC Adapter
into a power outlet that is appropriate to the charger’s power rating (this will vary in different
countries).
2. Insert the Battery Pack(s) into the ‘D’-shaped charging bays as shown below, making sure to
fully engage the contacts on each.
LEDs
Charging
Bays
Battery
Packs
AC Adapter
Instructions
4 Station Charger
PowerScan 7000BT
