DISTRIBUTION: IN SOLOPROTECT CUSTOMERS
SoloProtect ID US: User Guide
US SoloProtect ID User Guide v2.0 d1909189
© SoloProtect Ltd, 2018
Page 14 of 31
Signal
Symbol
Colour
Strong
4 bars
Green
Good
3 bars
Amber
Medium
2 bars
Amber
Low
1 bar
Red
Critical
0 bars
Red
Table 2:
Signal Indication Table
When both the battery/signal symbols and LEDs have displayed their respective status for five
seconds, the symbols and LEDs are turned off and the device is ready for use.
If either of the LED colours are red, you should not rely on your device in an emergency.
When the battery symbol has only one cell remaining (and has an amber LED colour), you should
recharge your device as soon as possible.
If your SoloProtect ID is consistently indicating Low to Critical Signal, please contact our SoloProtect
Customer Support Team.
If your SoloProtect ID is in an Amber Alert* state or a Red Alert state when the Device check button is
pressed, the LEDs change to amber or red for two seconds to give an indication of the state:
•
Constant amber for two seconds indicates an Amber Alert is in progress.
•
Constant red for two seconds indicates a Red Alert is in progress
– the Alert symbol will be on
the display throughout the alert.
Please note for GNSS enabled devices you will see a blue Satellite Icon at the end of the Device
Check
– please refer to the GNSS Section of this manual for further details.
*Amber Alert is known as a ‘Status Check’ in the USA and Canada
