DISTRIBUTION: IN SOLOPROTECT CUSTOMERS
SoloProtect ID US: User Guide
US SoloProtect ID User Guide v2.0 d1909189
© SoloProtect Ltd, 2018
Page 27 of 31
5.2
Compliance with FCC and IC Rules and Regulations
FCC Compliance Statement and RF Exposure Statement
The SOLO-ID-US device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2) This device must
accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. SAR has been evaluated with a maximum SAR value reported of 1.46W/kg @ 0mm
separation from body and 0.59W/Kg @ 10mm separation from head. This transmitter must not be co-
located or operating in conjunction with any other antenna or transmitter.
IC Compliance Statement
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to
the following two conditions: (1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit
pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
The SOLO-ID-US has been designed to comply with safety requirements for exposure to radio waves
(SAR). SAR testing has been performed in accordance with RSS-102, with the SOLO-ID-US
transmitting at its highest certified power level in all used frequency bands. The highest SAR value for
the SOLO-ID-US when tested was 1.46W/Kg @ 0mm separation from body and 0.59W/Kg @ 10mm
separation from head. Please follow the instructions included in the user guide for product installation
and use.
Le SOLO-ID-US est conçu pour se conformer aux exigences de sécurité pour l'exposition aux ondes
radio (SAR). Tests SAR a été effectué conformément à la norme RSS-102, avec le SOLO-ID-US à
son niveau de puissance maximum certifié dans toutes les bandes de fréquences utilisées. La valeur
SAR maximale pour le SOLO-ID-US lorsqu'il est testé était 1.46W/Kg
@ 0mm de séparation du corps
et 0.59W / Kg @ 10mm de séparation de la tête
. S'il vous plaît suivez les instructions incluses dans le
guide utilisateur pour l'installation du produit et son utilisation.
Changes or modifications to this unit not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
5.3
Risks Associated with Pacemakers
Due to the maximum SAR values, SoloProtect ID should not impair the performance of implanted
pacemakers. However, the general recommendation is to maintain at least 15 centimetres between a
GSM-based device and a pacemaker. If you are in any doubt, seek advice and clarification from your
physician and/or the manufacturer of your specific pacemaker.
Numerous studies have been performed to assess the risks of such devices impairing the correct
functioning of pacemakers.
There is a general consensus across the studies found in regard to the following:
•
The degree of protection of pacemakers against the effects of RFEE depend on the design of
pacemaker. The latest pacemakers with ceramic filters appear to immune to RFEE.
