DISTRIBUTION: IN SOLOPROTECT CUSTOMERS
SoloProtect ID US: User Guide
US SoloProtect ID User Guide v2.0 d1909189
© SoloProtect Ltd, 2018
Page 12 of 31
Figure 6:
Turning your SoloProtect ID On and Off
When your SoloProtect ID is on, it registers with the GSM network and is ready to communicate to our
Alarm Receiving Centre.
4.1.3
Device Check
You can check your SoloProtect ID battery level and signal strength before each visit or location
change, thus making sure that your SoloProtect ID can operate effectively if needed.
Press and hold the Device Check button for 1.5 seconds until the display and LEDs start to flash. After
a short while, the display will show first the battery symbol and a colour, then the signal symbol and a
colour.
