DISTRIBUTION: IN SOLOPROTECT CUSTOMERS
SoloProtect ID US: User Guide
US SoloProtect ID User Guide v2.0 d1909189
© SoloProtect Ltd, 2018
Page 11 of 31
4.
How to Use your SoloProtect ID
4.1
Functionality
4.1.1
Charging
Your SoloProtect ID must be fully charged before you use it. We recommend leaving the device on
charge for a minimum of 2 hours per day or at the end of each shift using the SoloProtect supplied
charger. Your SoloProtect ID cannot be used whilst on charge, however once removed from charge it
is automatically turned on and ready to use.
When your SoloProtect ID is connected to the charger, the battery symbol on the display is active. As
the battery charges, the battery symbol shows more cells and the LEDs change colour from flashing
red, to flashing amber. When the battery is fully charged, the LEDs change to constant green.
Figure 5:
Charging your SoloProtect ID
4.1.2
Switching your SoloProtect ID on and off
To check your SoloProtect ID is on, look for the power symbol in the left of the display. You can also
press the Device Check button for 2 seconds. If the LCD and LEDs do not start flashing, the device is
off.
To switch your SoloProtect ID on, press the Device Check and Amber Alert buttons together for 2.5
seconds until the LCD and LEDs start flashing. The device vibrates once briefly to confirm it has
turned on, and then will go through its bootup sequence which also includes 5 further buzzes as well
as displaying all the LED colours and all the LCD symbols. You will also hear beeps out of the
speaker.
To switch your SoloProtect ID off, press the Device Check and Amber buttons together for 2.5
seconds until the device vibrates twice.
