DISTRIBUTION: IN SOLOPROTECT CUSTOMERS
SoloProtect ID US: User Guide
US SoloProtect ID User Guide v2.0 d1909189
© SoloProtect Ltd, 2018
Page 10 of 31
Figure 4:
Inserting an ID card
3.2
Care and Maintenance
SoloProtect ID is purposely designed so that you do not need to perform any routine maintenance
procedures. However, you should note the following points about cleaning and general care.
3.2.1
Cleaning
Use a damp cloth (not wet) to remove any dirt from your SoloProtect ID. Be very careful not to allow
water into the unit.
Do not use any alcohol or chemical cleaning agents of any type.
3.2.2
Moisture Resistance
SoloProtect ID is not waterproof and you should take care not to expose the unit to liquids of any kind,
including water, rain, steam and extreme humidity.
3.2.3
Impact Damage
SoloProtect ID is made from a tough ABS plastic case. It is designed to resist a certain amount of
damage caused by general use, but will not withstand heavy impacts.
