Solo TOC-1 Owner'S Manual Download

Page: 108 / 144

Wheels and Tires

7-24

Recommended tire inflation pressure

Tire inflation pressure, established by ElectraMeccanica, which

is based on the type of tires that are mounted on the vehicle at

the factory.
This information can be found on the Tire and Loading

Information label located on the frame of the right door.

Rim

The metal support for a tire, or tire and tube, upon which the

tire beads are seated.

Tread

The portion of a tire that comes into contact with the road.

Tread Wear Indicators (TWI)

The projections within the principal grooves designed to give a

visual indication of the degrees of wear of the tread.

Vehicle capacity weight

The number of seats multiplied by XXX lb or XXX kg plus the

rated amount of load/luggage.

Summary of Contents for TOC-1

















































































































































Search results

Summary of Contents for TOC-1

Reviews:

Related manuals for TOC-1

Brands by name

Popular brands

Solo TOC-1, Owner'S Manual

Search results

Summary of Contents for TOC-1

Reviews:

Related manuals for TOC-1

Brands by name

Popular brands