Solo TOC-1, Owner'S Manual

Page: 94 / 144

7-10
Windshield Washer and Wiper
Windshield Washer and Wiper
Washer Fluid
Some windshield washing products are
flammable, particularly in undiluted
concentrations. Do not allow washer fluid to come into
contact with open flames or sources of ignition.
If the vehicle is operated in temperatures
below 40°F (4°C), use a washer fluid with
frost protection. In cold weather, failure to use a washer fluid
with frost protection could result in impaired vision and an
unsafe driving condition.
Check and fill up the reservoir level monthly (or more
frequently in high-use conditions).
Operate the washer periodically to check that the nozzle is
clear and properly directed.
Washer fluid specification
Any automotive windshield washer fluid that meets regional
freeze protection requirements can be used in your SOLO.
Filling up the washer reservoir
The windshield washer fluid reservoir is located under the hood.
1. Open the hood (See “Hood”, page 4-28 ).
2. Remove the charge cable from its storage space.
3. Clean the reservoir cap with a clean, dry cloth before
opening to prevent dirt or contaminants from entering the
reservoir.
4. Position an absorbent cloth around the reservoir to absorb
any washer fluid spillage.
5. Fill the reservoir with an approved washer fluid until the
fluid is visible just below the reservoir neck.
6. Close the reservoir cap and remove the cloth.
7. Return the charge cable to its storage space.
WARNING
WARNING