Sollae Systems CIE-H10A Page 77 User Manual Download | Manualshive

Page: 77 / 80

background image

CIE-H10A User Manual Ver. 1.1

- 76 -

https://www.ezTCP.com

12.2

Exemption from Liability

12.2.1 English version

In no event shall Sollae Systems Co., Ltd. And its distributors be liable for any damages

whatsoever (including, without limitation, damages for loss of profit, operating cost for
commercial interruption, loss of information, or any other financial loss) from the use or
inability to use the CIE-H10A even if Sollae Systems Co., Ltd. Or its distributors have been
informed of such damages.

The CIE-H10A is not designed and not authorized for use in military applications, in

nuclear applications, in airport applications or for use in applications involving explosives,
or in medical applications, or for use in security alarm, or for use in a fire alarm, or in
applications involving elevators, or in embedded applications in vehicles such as but not
limited to cars, planes, trucks, boats, aircraft, helicopters, etc..

In the same way, the CIE-H10A is not designed, or intended, or authorized to test,

develop, or be built into applications where failure could create a dangerous situation that
may result in financial losses, damage to property, personal injury, or the death of people
or  animals.  If  you  use  the  CIE-H10A  voluntarily  or  involuntarily  for  such  unauthorized
applications,  you  agree  to  subtract  Sollae  Systems  Co.,  Ltd.  And  its  distributors  from  all
liability for any claim for compensation.

Sollae Systems Co., Ltd. And its distributors entire liability and your exclusive remedy

shall be Sollae Systems Co., Ltd. And its distributors option for the return of the price paid
for, or repair, or replacement of the CIE-H10A.

Sollae Systems Co., Ltd. And its distributors disclaim all other warranties, either expressed

or implied, including, but not limited to, the implied warranties of merchantability and
fitness for a particular purpose, with respect to the CIE-H10A including accompanying
written material, hardware and firmware.

12.2.2 French version

⚫

Documentation

La documentation du boîtier

CIE-H10A

est conçue avec la plus grande attention. Tous les

efforts ont été mis en œuvre pour éviter les anomalies. Toutefois, nous ne pouvons garantir
que cette documentation soit à 100% exempt de toute erreur. Les informations présentes
dans cette documentation sont données à titre indicatif. Les caractéristiques techniques

«
...
75
76
77
78
79
...
»

Summary of Contents for CIE-H10A

















































































Reviews:

No comments

Related manuals for CIE-H10A

Brand: D-Link Pages: 113

Brand: D-Link Pages: 146

Brand: IBM Pages: 144

Brand: Dahua Pages: 58

Compact Comfort VAV12

Brand: SAI HVAC Pages: 16

Brand: Saitek Pages: 15

Brand: saia-burgess Pages: 203

Brand: Sailor Pages: 1

Brand: Madison AV Pages: 2

Brand: Yngri Pages: 20

Brand: Newport Pages: 417

Brand: ACL Pages: 20

Brand: FrSky Pages: 2

Brand: Blucave Pages: 2

Brand: Carel Pages: 48

Brand: ESBE Pages: 4

Controller CR100

Brand: Sonos Pages: 12

Brand: Heat & Cool Pages: 5

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands