Solid State Logic XLogic Super Analogue, Owner'S Manual

Page: 21 / 30

Channel Instrument Input
Signal applied to Channel Instrument Input and measured at Output. Pad switched out and Input Gain control
set to +6dB.
Gain Variable from +6dB to +72dB in 6dB steps
Independently switchable 18dB Pad
Input Impedance 1MΩ
Output Headroom > +26dBu at onset of clipping
THD + Noise < 0.003% at 1kHz
(-10dBu applied, +30dB gain) < 0.005% at 10kHz
Frequency Response +0.05dB/-0.1dB from 20Hz to 20kHz
–3dB at 200kHz
Equivalent Input Noise < –70dBu at +40dB gain
(Input terminated with 150Ω) < –89dBu at +20dB gain
Channel Output
Output is fully balanced and floating, and incorporates SSL’s cable compensating output design, allowing it to
drive long cable runs without degrading the frequency response.
Gain Continuously variable from -20dB to +20dB with indent at 0dB position
Output Impedance: < 40Ω
Appendix
Page 17