Solid State Logic XLogic Super Analogue, Owner'S Manual

Page: 17 / 30

5.0 Signal Routing
Channel Processing Order
There are two switches that control the order of the signal processing elements. These are Filters to INPUT and
Dynamics PRE EQ . The table below shows the effect of these:
Side Chain Processing Order (KEY switch released)
The EQ and filter sections can be assigned to the dynamics side chain using the DYN S/CH switches in the
respective sections. The table below shows the sidechain source and processing for the various combinations of
these:
Side Chain Processing Order (KEY switch in)
Finally the side chain can be fed from the KEY input on the rear of the unit by selecting KEY . The table below
shows the sidechain source and processing for the various combinations of
DYN S/CH
switches:
Switch 1 Switch 2
KEY Input
EQ to
'DYN S/C '
KEY Input Equaliser
Filters to
'DYN S/C '
KEY Input Filters
EQ to
'DYN S/C '
Filters to
'DYN S/C '
KEY Input Equaliser Filters
Side chain processing order
Switch 1 Switch 2
Side chain
source
Dynamics
Input
EQ to
'DYN S/C
'
Dynamics
Input
Equaliser
Filters to
'DYN S/C '
Dynamics
Input
Filters
EQ to
'DYN S/C
'
Filters to
'DYN S/C
'
Dynamics
Input
Equaliser Filters
Side chain processing order
Switch 1 Switch 2
Equaliser Filters Dynamics
Filters to
'INPUT'
Filters Equaliser Dynamics
Dynamics
'PRE EQ'
Dynamics Filters
Filters to
'INPUT'
Dynamics
'PRE EQ'
Filters Dynamics Equaliser
Processing Order
Equaliser
Signal Routing
Page 13