Solid State Logic C10 HD, Installation Manual, Page: 180 / 237

Front Panel Menu
Page 5-56 | Section 5: System Administration C10 HD Installation Manual
F
Ader
r
eSet
If the faders become miscalibrated due to temperature variations or physical knocks since the front panel was last powered
up, they can be recalibrated by pressing this button.
All of the faders will close and an
Alert
pop-up will appear in the centre of the Touchscreen:
Note that when the faders close, the audio is not changed in any way – it is completely safe to do a fader reset, even
while On-Air!
The system uses the fully closed position as a mechanical reference for calibrating the faders.
‰
Manually close any faders that were not moved to this position — perhaps their motion was blocked by a book or
tape.
‰
Touch continue to activate the recalibration process, which takes a couple of seconds.
‰
Once the reset is completed, faders are returned to their correct mixing positions and you may continue working as
normal.
Note that this function also re-initialises all the front panel controls, and could therefore be used after clearing a front
panel lockup if you are suspicious that some of the controls have been knocked out of position (note that a Layer change
will also refresh the front panel).