Solid State Logic C10 HD, Installation Manual, Page: 158 / 237

AeSeBu o
utPut
P
ArAmeterS
:
mono 96 determines how 96kHz outputs are derived. The options are Single Wire ( Sing ) where each channel
uses one output clocked at 96kHz, or Dual Wire ( dual ) where each channel using two outputs
clocked at 48kHz for odd/even samples. However, as 96KHz outputs don’t provide any benefits (see
note above), how they are derived is largely irrelevant!
Src allows sample rate converters to be placed on outputs. If any of the remaining digital output parameters
require SRCs, they are automatically introduced;
resolution allows the output bit resolution to be altered. Stabbing these buttons calls up a resolution pop-up
from which 24bit , 20bit and 16bit can be selected;
dither
switches dither on and off;
oP rate calls up an output clock pop-up which allows the output sample rate to be set to follow the first
six digital inputs ( AeS 1/2 , AeS 3/4 , AeS 5/6 ), 44.1kHz ( 44.1khz ), the current console sample
rate (displayed above the option 44.1khz ) or twice the current console sample rate ( 2 x Fs ).
Note: Digital IO is configured in pairs.
Page 5-34 | Section 5: System Administration C10 HD Installation Manual
Route Menu