USER MANUAL
Neon LED Configuration
Neon LED C
onfigur
ation
Toll Free: 866.592.3873
Email: [email protected]
www.SolidApollo.com
Page 4
Pictures of Correct Connector Orientation
Neon LED (2-Prong)
PRONG BARRELS ON BOTTOM
PRONGS ON BOTTOM
First, the components need to be tested to confirm they work before adding any glue. The Neon LED can only be powered
from one end. If you are unsure which end is correct, one end at a time must be tested to find the correct end for adding
power for the Neon LED to work.
1
Powering the Neon:
In this section you will learn how to add the power adapter to any cut point on the Neon LED.
...continued on next page
For more information see Page 15 for detailed pictures of Neon LED and the matching parts
Take the prong and line it up to the Neon LED making sure the prong is oriented in the correct direction. Carefully insert
the pointy end of the prong into exposed wire ends. Try to have each prong insert into the center of each exposed wire
end. The prong needs to be inserted as far as possible without using excessive force.
2
insert prong in bottom right wires
Neon on Side
NEON
END
plastic bracket on prong does not
match shape of Neon
CORRECT:
INCORRECT:
prongs insert in
bottom wires
Neon Color on Side
