USER MANUAL
Neon LED Configuration
Neon LED C
onfigur
ation
™
Toll Free: 866.592.3873
Email: [email protected]
www.SolidApollo.com
Page 14
If you have any further questions, please contact us by phone or email using the contact information at
the top right of this page.
Remove the bracket, and drill pilot holes for the screws. Take a screw and the mounting bracket and begin inserting the
first screw. Take the second screw and begin inserting the screw. Take a Phillips head screwdriver and screw in the first
screw until it sits flush with the bottom of the bracket. Screw in the second screw until it is also flush.
Carefully press the Neon LED into the mounting bracket. Make sure the Neon is pressed in until it is touching the bottom
of the inside of the bracket.
3
4
Technical Specifications:
Lumen’s Total:
Up To 29700 Lm (Pure White Color)
Lumen’s Per Foot:
Up to 180 Lm (Pure White Color)
Total LED’s:
5220
LED’s Per Foot:
36
Operating Voltage :
120V AC
Watts Per Foot:
2.42W
Watts Per Spool:
400W
Dimmable: Yes
CRI:
82
LED Type:
SMD 3528
Beam Angle :
180
