USER MANUAL
Neon LED Configuration
Neon LED C
onfigur
ation
™
Toll Free: 866.592.3873
Email: [email protected]
www.SolidApollo.com
Page 12
Take the endcap and fill it half way with silicone glue. Insert the endcap on the end of the Neon LED until the inner back
wall of the endcap is touching the end of the Neon. Sometimes the endcap has to be wiggled from side to side so the
back wall of the endcap touches the end of the Neon LED.
1
Adding an Endcap:
In this section you will learn how to add an end cap to seal the end of the Neon LED.
For drying, we recommend at least 24 hours of drying time before installing or using the Neon LED.
Extra glue usually comes out at the connection. Take your finger and wipe the excess glue all the way around the connec-
tion point. Wipe extra glue onto the paper towel.
2
