manualshive.com logo in svg

Solid Apollo Neon LED, User Manual, Page: 9 / 15

Share
Download
Solid Apollo Neon LED User Manual Download Page 9

USER MANUAL 

Neon LED Configuration

Neon LED C

onfigur

ation

 

 

Page 9

Toll Free: 866.592.3873

Email: [email protected]

www.SolidApollo.com

...continued on next page

Then take the Neon LED with the prong and insert it into the power adapter connector in the correct orientation. The 
prongs will slide into the small barrels inside the connector.

3

insert prong in bottom right wires

Neon on Side

NEON

END

CORRECT:

INCORRECT:

plastic bracket 

fits in straight

plastic bracket 

crooked

Neon fits in straight

Neon is not straight

Take the plug on the power adapter and connect it into the wall outlet. 

Warning: The opposite end of the Neon LED 

has not been sealed and must not touch any conductive material or electric shock or injury could occur.

 If 

the Neon LED turns on, then the prong was inserted into the correct end of the Neon. If the Neon LED does not come on, 
then unplug the power adapter and repeat from step 1 to test the opposite end of the Neon. Tweezers or tongs maybe 
required to remove the prongs if they are stuck inside the connector.

4

Summary of Contents for Neon LED
















Reviews:

No comments