Solid Apollo Neon LED User Manual Download Page 13 | Manualshive

Page: 13 / 15

background image

USER MANUAL

Neon LED Configuration

Neon LED C

onfigur

ation

™

Toll Free: 866.592.3873

Email: [email protected]

www.SolidApollo.com

Page 13

Plan the location where the mounting brackets will be placed. Take the mounting bracket and hold it up to the location
being mounted to.

1

Installing Mounting Brackets:

In this section you will learn how to mount the brackets for Neon LED. Each bracket includes 2 screws. Please note other types of screws
and hardware maybe required depending on the surface being mounted to. Please ask your local hardware store for advice if you are
unsure.

For straight lines, we suggest using a mounting bracket every foot for linear applications. If doing a large curve, make sure the Neon LED
will not be bent in 90 degree bends. We recommend attaching the brackets to test how many will be needed to hold the desired curve,
as several brackets could be required every foot.

With your other hand take a pencil or marker and mark the screw locations.

2

Tools Required:

Pencil
Phillips Head Screwdriver
Drill
Drill Bit

...continued on next page

«
...
11
12
13
14
15
»

Summary of Contents for Neon LED
















Reviews:

No comments

Related manuals for Neon LED

Brand: KaVo Pages: 16

Giraffe OmniBed

Brand: Ohmeda Pages: 54

Brand: Palazzetti Pages: 112

Brand: Panasonic Pages: 30

Brand: ZIGBEE Pages: 6

Brand: Daisy Pages: 2

Below Ground Pool Cover Box

Brand: Daisy Pages: 3

Brand: Eaton Pages: 16

Brand: Eaton Pages: 15

Brand: Olsen Pages: 4

Brand: Fakir Pages: 22

Brand: Taylor-Wharton Pages: 25

Brand: i-CAT Pages: 96

Novation Launchkey Mini

Brand: Focusrite Audio Engineering Pages: 36

Brand: Vitax Pages: 12

Brand: FoodMarble Pages: 44

Brand: ISA Pages: 24

Brand: Torque Pages: 10

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands