Solectria Renewables PVI 14TL Installation And Operation Manual Download Page 24 | Manualshive

Page: 24 / 58

background image

Installation and Operation Manual (Rev B)

24

7. SolrenView External Monitoring

PVI 14TL and 20TL inverters include an option for a SolrenView gateway integrated with the

inverters wiring box. This device can be used for the purpose of monitoring and data logging.

The SolrenView gateway can be factory installed, distributor installed, or field installed.

From the inverter a user can configure and monitor the inverter using a human-machine

interface (HMI). This HMI consists of the LCD display and four buttons.

Figure 7.1 – SolrenView Gateway HMI

WARNING:  SolrenView  gateway  connections  must  be  made  by  qualified  personnel
only.  To  reduce  the  risk  of  electric  shock,  you  should  never  attempt  to  open  the
inverter, DC, or AC enclosure doors, or perform any service or troubleshooting without

prior training. Before attempting to service or troubleshoot the inverter, please read
the entire manual.

The back side of SolrenView gateway provides connectivity to the data monitoring system.

Solectria Renewables’ own SolrenView.com data monitoring system can be interfaced using

Ethernet over twisted pair.

«
...
22
23
24
25
26
...
»

Summary of Contents for PVI 14TL



























































Reviews:

No comments

Related manuals for PVI 14TL

Brand: madVR Labs Pages: 8

Brand: Allied Telesis Pages: 50

DataBender CVX-1300

Brand: Cypress Pages: 28

Brand: Linear Technology Pages: 6

Brand: Black Box Pages: 60

Brand: GE Pages: 55

COMBIVERT F5 Series

Brand: KEB Pages: 116

Brand: Velleman Pages: 27

Brand: Wacker Neuson Pages: 36

Brand: Wagan Pages: 44

Brand: Lindy Pages: 2

Teranex Mini IP Video 12G

Brand: Blackmagicdesign Pages: 22

basic-line DCC 1-00

Brand: axing Pages: 4

Brand: Linear Pages: 3

Brand: Badger Power Electronics Pages: 29

Brand: AJA Pages: 29

Brand: ADF Web Pages: 29

Brand: Drivecon Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands