Solectek SkyMate, Operator'S Manual, Page: 60 / 124

Chapter 2: Configuring Your SkyWay Series Unit(s)
46
TFTP Server. The IP address of the next server to use in bootstrap for the pool.
This is the server that the SkyMate or SkyWay Net Substation will download its
configuration database from.
Row Status. The status of the pool. When first adding the pool, “Create and go”
should be used; the state will then be changed to active. If the pool is to be deleted,
then the status should be changed to “Destroy.”
DHCP Manual Configuration
The DHCP server will search manual configurations that have been configured on
this screen when choosing a configuration to assign to a DHCP client. A manual
configuration is a binding of a configuration to a hardware type and hardware
address or a client identifier. When creating a manual configuration, only the First
IP Address, Last IP Address, Subnet Mask, Lease Duration, and Client ID or
Hardware Type and Hardware Address are required.
IP Address. The IP address of the configuration.
Subnet Mask. The subnet mask of the configuration.
Hardware Type. The physical network type that the client is using, e.g.
“1”=Ethernet or RF. For a complete list, refer to the ARP section of the “Assigned
Numbers” RFC.
Hardware Address. The MAC address or hardware address of the client in
hexadecimal.
Client ID. The client identifier used by the client. Typically, this is the hardware
type followed by the Hardware Address. For example, a Solectek product or
Windows operating system with a hardware type of 1 and hardware address of
0x00-01-02-03-04-05 would use a client identifier of 01-00-01-02-03-04-05.
Default Router. The default gateway of the configuration.
Lease Duration (Days, Hours, Minutes).
The length of the lease in days,
hours, and minutes for the configuration. A lease of 0 days, 0 hours, and 0 minutes
is an infinite lease.
DNS Server 1. The first DNS server of the configuration.
DNS Server 2.
The second DNS server of the configuration.