The three tools above can be used
other network elements such as switches and host computers. You can ping the remote unit
from the unit you are accessing via the user interface.
needed to use these tools with a named target.
You can also navigate to
Status
unit, as shown in the screen below:
There are additional diagnostic tools to
under certain circumstances.
43
three tools above can be used to isolate an issue to the wireless link only, not involving
ements such as switches and host computers. You can ping the remote unit
from the unit you are accessing via the user interface. A default gateway and DNS server are
needed to use these tools with a named target.
Configuration -> Ethernet Configuration
Status -> ARP
to view the ARP status for both Master unit
, as shown in the screen below:
There are additional diagnostic tools to arrange automatic rebooting of the unit periodically or
isolate an issue to the wireless link only, not involving
ements such as switches and host computers. You can ping the remote unit
A default gateway and DNS server are
Ethernet Configuration
Master unit and Slave
arrange automatic rebooting of the unit periodically or
