background image

SÓLAS

 CONTEMPORARY FIRE 

10

SÓLAS ONE-TOUCH REMOTE OPERATION

PROGRAM MODE (Continued) 
Off Time Setting (PROGRAM 1)
1.  

1, OFF are displayed. ALL is 

displayed briefly. Hour flashes.

2. To select hour, press  or  .
3.  To confirm, press  . 

1, OFF 

are displayed. ALL displayed 

briefly. Minutes flash.

4. To select minutes, press or .
5. To confirm, press  or  .
NOTE:  Either continue to PROGRAM 2 and set ON and 

OFF times or stop programming at this point, and 

PROGRAM 2 remains deactivated.

NOTE:    PROGRAM 1 and 2 use the same ON 

(Thermostatic) and OFF temperatures. Once a 

new ON (Thermostatic) and/or OFF temperature 

has been set, that temperature becomes the new 

default setting.

NOTE:    ON and OFF times programmed for PROGRAM 1 

and PROGRAM 2 become the new default times.

The batteries must be removed to clear the PROGRAM 1 
and PROGRAM 2 ON and OFF times and temperatures.

SA: SU or Daily Timer (1-7) Selected
•   Set  ON time and OFF time using the same procedure 

as “ALL Selected" above.

• Waiting to finish setting.

LOW BATTERY INDICATION

CAUTION 

Do not use a screwdriver or other metallic object 

to remove the batteries from the Control Module 

battery holder or the Remote. This could cause a 

short circuit. 

NOTE: The batteries in your SÓLAS One-Touch 

remote control and control module are to be 

replaced annually. Only use brand name alkaline 

batteries such as Duracell or Energizer.

Remote
The battery icon 

will show when the battery needs 

to be replaced. Replace with two 1.5 V AAA alkaline 

batteries.
Control Module
Frequent beeps for 3 seconds when the motor turns 

indicate the batteries in the battery holder of the Control 

Module need to be replaced. Replace with four 1.5 V AA 

alkaline batteries.

AUTOMATIC SHUT-OFF

Countdown Timer
At the end of countdown time period, the fire turns 

off. The Countdown Timer only works in Manual and 

Thermostatic. Maximum countdown time is 9 hours and 

50 minutes.
Seven Day Shut Off
If there is no activity for 7 days, the SÓLAS fireplace will 

automatically shut down the pilot as required by certain 

jurisdictions.  

AUTOMATIC TURN DOWN

3 Hour No Communication Function
If your fireplace and remote are inactive for three hours—

for example, if the remote is left in another room—your 

fireplace automatically turns down to pilot.

Benefit

SÓLAS products are designed with a focus on safety and 

environmental responsibility. This will help save fuel and 

is an environmental benefit. Program the temperature 

and timer modes to maximize your heating efficiency.

OFF

Summary of Contents for One-Touch Remote













Reviews: