background image

solasfires.com

5

SÓLAS ONE-TOUCH REMOTE OPERATION

HOW TO TURN YOUR FIREPLACE OFF 

(INCLUDING PILOT)
Familiarize yourself with each of these methods before 

operating your fireplace.
Remote and Wall Touch Pad*: Press and hold the ON-

OFF button for a second (either on the Remote or the 

optional Wall Touch Pad).
If the flames are on, they go down and you hear the valve 

motor wind down. You hear a clunk and a beep indicating 

that the valve has received the signal from the Remote.

HOW TO ENSURE YOUR FIREPLACE 

CANNOT BE TURNED ON 

INADVERTENTLY

You can use the following method to ensure that your 

fireplace will not turn on when you don’t want it on.
First, ensure your fireplace is turned off—including the 

pilot—and cold BEFORE going ahead.
•  Close the shut-off valve on the gas supply line to 

the appliance.

•  Remove all batteries from the Control Module as well as 

the batteries from the Remote.

• Shut off power at the breaker.

Automatic Shut-Off (in certain conditions)

Your fireplace’s Remote is equipped with an automatic 

shut-off mechanism which is activated in certain 

conditions. See page 38 in the Remote Control Operation 

section for a description of this feature.
NOTE: Before using the remote control system for 

the first time, the Control Module and the Remote are 

synchronized at the factory. See the section SÓLAS 

Remote Pairing Set-up on page 32 of this manual if the 

Control Module and Remote lose synchronization.
IMPORTANT: BEFORE YOU BEGIN, please note that 

with this system, the settings of time, temperature and 

automatic ON/OFF can only be programmed when the 

function display is flashing. Be patient when programming 

as it does take time to set-up.

UP

DOWN

ON-OFF

PM

AM

ON/OFF

Countdown

Timer 

Thermostatic 

Mode

Main Display

Increase Flame 

Decrease Flame 

Light 

(not used)

Split Flow Mode 

(not used)

Program

Mode

Comfort Blower

Auxiliary Feature

(not used)

SÓLAS One-Touch 

Programmable 

Thermostatic Remote 

Part #S-507

SÓLAS Wall Touch Pad* 

(Optional) 

Part #WTP-1500 

*Not Compatible with SÓLAS Self-Calibrating Power Vent Kit

Summary of Contents for One-Touch Remote













Reviews: