solasfires.com
11
SÓLAS ONE-TOUCH REMOTE OPERATION
SÓLAS ONE-TOUCH REMOTE TIPS
• Double-click to go directly to LO (lowest)
flame setting.
• Double-click to go directly to HI (highest)
flame setting.
• The batteries in your SÓLAS one touch remote control
and control module are to be replaced annually. Only
use brand name alkaline batteries such as Duracell or
Energizer.
• When using the Remote, it should be within 15 feet
(4.5 meters) of the fireplace.
• Don’t leave the Remote on the mantel or hearth or any
hot surfaces. Use the Remote wall holder provided.
• To keep out of children’s reach, use the Remote wall
holder provided.
• Be patient when programming: it takes time to set-up.
• Once you turn a pilot off, it takes a few minutes before
your can turn it back on.
ERROR
CODE
MESSAGE
DURATION OF
DISPLAY
SYMPTOM
POSSIBLE CAUSE
F04
F04
4 seconds
• No pilot flame within 30 sec
• Note: After 3 failed ignition
sequences, F06 shown
• No gas supply
• Air in pilot supply line
• No spark
• Reversed polarity in thermocouple
wiring
F06
F06
4 seconds
• 3 failed ignition sequences
in 5 minutes
• Fire is not responding,
no pilot flame
• No gas supply
• Air in pilot supply line
• No spark
• Reversed polarity in
thermocouple wiring
• Incorrect pilot orifice if valve has
been converted from LPG to NG
or vice versa
F07
Low Battery
Symbol
Permanent
• Battery icon flashes on
Remote display
• Low battery in Remote
F09
F09
4 seconds
• Fire is not responding
• No electronic control of fire
• Down arrow button was not
pressed during pairing
• Control Module and Remote are
not synced
F46
F46
4 seconds
• Fire is not responding
• Intermittent response
• No electronic control of fire
• No or bad connection between
Control Module and Remote
• No power at Control Module
• Low communication range
(Control Module Faulty, Remote
not communicating with
Control Module)
Your SÓLAS Dealer is here to help, if you have any trouble with your SÓLAS
Fireplace or SÓLAS One-Touch Remote. Please contact your Dealer for support.
