Verifying Meter Connection
Verifying the Meter Connections using
SetApp
To verify the connectivity of two meters using SetApp, refer to
"Verifying the Meter Connection using SetApp" on page 39
Verifying the Meter Connections using the
Device Display
To verify the meter connections in devices with a display:
1. Press the Enter button or the LCD external button until the
Communication status screen is displayed as shown below.
When two meters are connected, a screen similar to the
following should appear:
w w w w w w w
D e v P r o t # #
R S 4 8 5 - 1 < M L T > < 0 2 > < 0 2 >
R S 4 8 5 - 2 < - - - > < - - > < - - >
Z i g B e e < - - - > < - - > < - - >
Dev
: The type of device configured to this port.
MLT
indicates multiple meters.
Prot
: The number of configured meters. For dual meters it
should display 2.
##
: The number of communicating meters. For dual meters
Energy Meter with Modbus Connection Installation Guide MAN-01-00269-1.5
60
Verifying Meter Connection
