P l e a s e e n t e r
P a s s w o r d
* * * * * * * *
4. Use the three right most buttons (Up-1, Down-2 and Enter-
3) to type in the following default password:
12312312
.
5. Scroll to the
Communication
menu and select
RS485-X
Conf
(X represents the actual RS485 port to which the
electricity meter is connected: 1 or E for the inverter; 1 or 2
or E for the Commercial Gateway). A screen similar to the
following is displayed (the example here appears in
master/slave installations):
D e v i c e T y p e < S E >
P r o t o c o l < M >
D e v i c e I D < 1 >
S l a v e D e t e c t < # >
L o n g S L V D e t e c t < # >
S l a v e L i s t < # >
M u l t i - I n v . S e t
6. Select
Device Type
. the following screen is displayed:
S o l a r E d g e < M >
N o n - S E L o g g e r < S >
M u l t i D e v i c e s < M >
N o n e
7. Select
Multi Devices
, a screen similar to the following is
displayed:
Energy Meter with Modbus Connection Installation Guide MAN-01-00269-1.5
Chapter 3: Configuration
35
