Solana DRAFT 00, Owner'S Manual

Page: 28 / 127

COMFORT CONTROL ® SYSTEM
COMFORT CONTROL
®
AIR VALVE: Turning the Comfort Control
®
selector to MAX allows for the same volume of air to flow to all
Moto-Massage
®
jets and Precision
®
jets simultaneously. On the Solana ™ , the jet faceplate is then used to control the intensity of the
rotary hydromassage jet.
NOTE: Always turn the Comfort Control
®
selector to the MIN position anytime the spa is not being used. This will help make the spa
operate more quietly and heat more efficiently when the vinyl cover is in place.
SPA CONTROL PANEL
A. JET BUTTON: Use the JET button to activate the jet pump. Pushing
the JET button once will activate the jet pump on low speed. The
low speed should be used as a filtration cycle rather than as an
operation cycle. Pushing it a second time will activate the high speed
mode of the jet pump. A third push will deactivate the jet pump.
NOTE: The Moto-Massage
®
jet will not function properly with the
jet pump on low speed.
The jet LED on the control panel will illuminate whenever the jet
pump is activated (either high or low speed) using the JET button.
The LED does not illuminate when the jet pump comes on
automatically to heat the water.
B. LIGHT BUTTON: The Solana ™ spa is equipped with a low-voltage
spa light. Push the LIGHT button to turn it on. Push it a second time
to turn it off. For your spa enjoyment, a blue and a red lens cover
have been included with the spa’s owner’s package. The original
clear lens is not removable – a colored lens can be snapped over the
clear lens to achieve the desired color.
When the light is activated, the light LED on the control panel will
illuminate.
27
™
Set Temperature
Display
Jet LED Light LED Circulation
Cycle LED
Jet
Button
Light
Button
Temperature
Minus
Temperature
Plus