Solana DRAFT 00, Owner'S Manual

Page: 63 / 127

ADD-38998 (6/01)
T:\TECH\OWNERS\Solana\01 Owners\Addendum\Add-38998.doc
The Owner’s Manual contained in this owner’s packet has been updated. The Error messages
described in the Owner’s Manual have been changed, see Error Messages below for more
information.
Error Messages
The manufacturer of the Solana
™
control panel has made some modification to the control program since
the publication of the Owner’s Manual. The Owner’s Manual describes four error messages “FLO” ,
“FLC” , “HL” , “Prr” on page 16, 31, and 33.
The “FLO” , “FLC” and “HL” have been replaced with 3 flashing dots on the control panel display.
The “Prr” has been eliminated.
IMPORTANT : If the water temperature is significantly different than the temperature value
shown on the keypad display, contact your authorized Solana Dealer.
¨ ¨ ¨
If the 3 flashing dots appear on your control panel display do the following:
·
Clean filter or add water if necessary.
·
Shut power off and power the spa up again to reset the system
·
Contact your dealer for a service call if dots are still displayed
after
power up.
3 Flashing dots
on the display
.
Flashing Water
temperature
If the temperature flashes on the display, the power has been disconnected from
the spa and the flashing display indicates the default settings were restored when
power was connected.
·
Push a control panel button to stop the flashing.