background image

B

ALANCING THE P

H

A. The recommended pH level for your spa water is 7.4-7.6.
B. The pH level is the measure of acidity and alkalinity. Values above 7 are alkaline; those below 7 are acidic. Maintaining the proper

pH level is extremely important for:

• Optimizing the effectiveness of the sanitizer.
• Maintaining water that is comfortable for the user.
• Preventing equipment deterioration.

C. If the spa water’s pH level is too low, the following may result:

• The sanitizer will dissipate rapidly.

42

THE SOLANA

SPA WATER MAINTENANCE QUICK REFERENCE GUIDE

Ideal Range (ppm)

What Chemicals to Use

Steps

Minimum Maximum

To Raise

To Lower

1 Total Alkalinity

125

150

Sodium Hydrogen 

Sodium Bisulfate

Carbonate or 
Sodium Bicarbonate

2 Calcium Hardness 150

200

Calcium Hardness

Use a mixture of 

Increaser

75% hard water 
and 25% soft water 
or use a Stain and 
Scale Inhibitor

3 pH

7.4

7.6

Sodium Hydrogen

Sodium Bisulfate

Carbonate

4 Sanitizer

See section on Maintaining the Sanitizer Level

Summary of Contents for DRAFT 00
































































































































Reviews: