Fig. E
Fig. F
6.
At the front of the heater, gently remove the wire guard by prizing it away from its locating
holes at each end of the heater case (Fig. E).
7.
Remove the screw from the side reflector (Fig. F) and lift the side reflector up and away
from the heater. Repeat at the opposite end to remove other side reflector.
8.
The lamp emitter wires should be pulled out of the side slots (Fig. G) and the lamp emitter
can be lifted out completely. The wires can then be gently pulled forward so that they come
out from behind the reflector.
SCREW
Fig. G
18
of 20
Ref No. 043477-EN Rev. A
