16
of 20
Ref No. 043477-EN Rev. A
Y O U R R E P L A C E M E N T L A M P E M I T T E R
It is important that when ordering a replacement lamp emitter the heater model type is
specified. Failure to fit the correct lamp emitter will cause the heater to fail and become
dangerous in use. Please contact your service agent to purchase your replacement lamp
emitter.
H A N D L I N G T H E R E P L A C E M E N T L A M P E M I T T E R
Your new lamp emitter should be handled with care and without touching the quartz
glass with bare hands. A cotton glove may be used for this purpose. Remove any
finger marks with a soft cloth and methylated spirits or rubbing alcohol. Finger marks
will burn into the lamp emitters quartz glass causing premature failure.
M A I N T E N A N C E
CAUTION:
Switch off unit from the mains supply by locking off the breaker before
replacing a lamp emitter or any maintenance procedure including cleaning.
CAUTION:
Should dust or dirt appear on the reflector, it is recommended that that the
guard and lamp emitter are removed and the reflector is wiped with a lint-free cloth before
reassembling (see lamp emitter replacement instructions).
NOTE: For replacement lamp emitters or spare parts please contact your local
distributor quoting model type and rating from rating label. It is very important that
your replacement lamp emitter is exactly the same as the one it was supplied with.
Failure to fit the exact same type can cause the heater to prematurely fail.
!
