9
of 20
Ref No. 043477-EN Rev. A
9
. Cut the heater cords to the correct length for connecting into the terminal box. Then pass
cords through respective strain relief glands into the box. Strip back cable to relevant length.
Fig. 9
Fig. 10a
Fig. 10b
10
. Crimp Ø4mm ring terminals (Fig. 10a) to the wires ready for connection (Fig. 10b).
11
. Connect the ground wires to the ground post with copper clamps, serrated washers and
M4 nut then wire the heaters to the terminal block as shown in Fig. 11.
Fig. 11
GROUND
POST
INCOMING SUPPLY
CABLE ENTRY
GROUND
POST
INCOMING
SUPPLY
TERMINALS
L1 & L2
208/240V
INCOMING
SUPPLY
TERMINALS
L1 & L2
208/240V
