I M P O R TA N T I N S T R U C T I O N S
I M P O R TA N T I N S T R U C T I O N S
I M P O R TA N T I N S T R U C T I O N S
I M P O R TA N T I N S T R U C T I O N S
When using electrical INFRARED HEATERS, basic precautions
should always be followed to reduce the risk of fire, electric shock,
and injury to persons, including the following:
2
of 20
Ref No. 043477-EN Rev. A
1.
Read all instructions before using this heater.
2. Use this heater only as described in this manual. Any other use not
recommended by the manufacturer may cause fire, electric shock, or
injury to persons.
3. This heater is hot when in use. To avoid burns, do not let bare skin
touch hot surfaces. If provided, use handles when moving this heater.
Keep combustible materials, such as furniture, pillows, bedding,
papers, clothes, and curtains at least 6 feet (1.8m) from the front of the
heater and keep them away from the sides and rear.
4. Extreme caution is necessary when any heater is used by or near
children or invalids and whenever the heater is left operating and
unattended.
5. Do not operate any heater with a damaged cord after the heater
malfunctions, has been dropped or damaged in any manner. Return
heater to authorized service facility for examination, electrical or
mechanical adjustment, or repair.
6. This heater must not be used in bathrooms, laundry areas and similar
locations.
7. Do not run supply cables under carpeting. Do not cover supply cables
with throw rugs, runners, or the like. Arrange cord away from traffic
area and where it will not be tripped over.
8. To disconnect heater, if hard wired switch off breaker. Connect to
grounded CFI outlets only.
9.
WARNING
- Connect to properly grounded supply.
10. Check that the voltage indicated on the units rating label corresponds
to the mains supply voltage.
