manualshive.com logo in svg

Sokkia CX-62, Operator'S Manual, Page: 150 / 315

Share
Download
Sokkia CX-62 Operator'S Manual Download Page 150

142

21. MISSING LINE MEASUREMENT

• Pressing 

[REC]

 displays the 

screen shown in right. Pressing 

[OK]

 records the measured 

results for the second point.

Press

 [OK] 

to record missing 

line measurement results and 
return to the results screen.

Press

 {ESC} 

to continue 

measurement without saving 
2nd target or missing line 
measurement results.

• Missing line measurement 

results cannot be recorded when 
point names for 1st and/or 2nd 
target are null. Always input 
point names for both targets.

4. Sight the next target and press 

[MLM]

 to begin observation. 

Slope distance, horizontal 
distance and height difference 
between multiple points and the 
starting position can be measured 
this way.

• When 

[S/%]

 is pressed, the 

distance between two points (S) 
is displayed as the gradient 
between two points. 

• Press 

[MEAS]

 to re-observe the 

starting position. Sight the 
starting position and press 

[MEAS]

.

N

E

10.000
20.000
30.000

1.500 

m

Z
HR
PT

OK

1010

HD
VD

27.345m

1.012m

2

3

PT1
PT2
CD

OK

1010

LIST

ADD

SRCH

A

MLM

SD

HD

VD

20.757m

27.345m

1.012m

P1

REC

MOVE

MEAS

MLM

Summary of Contents for CX-62




























































































































































































































































































































Reviews:

No comments